BUYER TOOLS · FREE TO USE
Unit converter
Translate a supplier’s units into yours. Keep thickness, grammage and mass in their own lanes.
Review preview. Calculators and draft generation work here; inquiry submission is disabled until this page is approved for the live site.
02 / CONVERTED VALUE
Same measurement. New units.
0.9842519685 mil
25 µm ≈ 0.9842519685 mil
| Unit | Equivalent |
|---|
Display rounded to 10 significant digits. Conversion uses unrounded factors.
How the conversion works
Result = value × source factor ÷ target factor
For thickness: 1 inch = 25.4 mm, and 1 mil = 25.4 µm. For grammage: 1 oz/yd² ≈ 33.90574747 g/m², using the avoirdupois ounce.
Example: 25 µm = 0.025 mm ≈ 0.984252 mil. Area conversions square the length factor; converting m² to ft² is not the same as converting metres to feet.
Unit definitions: NIST conversion factors.
Some units cannot be exchanged
- Thickness is not grammage. Micrometres describe thickness; g/m² describes mass per area. A composite laminate cannot be converted using pure aluminium density.
- Denier is not GSM. Denier is mass per yarn length, not mass per fabric area. Fabric construction and other layers are also needed.
- Net is not gross. Changing kg to lb does not add cores, cartons or pallets.
Know width and length already? Calculate the order’s area and net material weight.
Calculations and draft generation run in your browser. Tool inputs are not sent by these tools; an inquiry is sent only when you submit the inquiry form. Site analytics follow the privacy policy.