What enclosure makers need
For heated printer chambers the material has to hold heat in and tolerate the temperatures the chamber reaches; for laser housings it has to block stray light and resist heat near the work area. A reflective foil face on the inside handles both, and a fire-rated construction adds a margin of safety where required.
Because the material is a flexible laminate rather than a rigid panel, the finished enclosure folds flat for shipping, which is why consumer-equipment enclosures are made this way.
Constructions
Reflective film laminated to woven scrim with a black or grey outer face; foil-foam versions where more insulation is needed; fire-rated grades for markets with strict consumer product rules. We slit to the width your sewing line uses, within our slitting range.
MOQ, lead time and samples
We sell by the roll and quote per square metre or per roll, slit to your width within our slitting range. MOQ is flexible and trial orders are welcome; volume pricing applies from the first container. Lead time is typically two to three weeks after order confirmation; stocked constructions ship faster.
Ask for samples with your inquiry. We send swatches of each candidate construction so your team can test reflectivity, heat performance and handling before ordering a roll.
Quality and compliance
Materials are produced in our own 8,000 m² facility in Shenzhen. Lamination and slitting are controlled in-house, so reflectivity, colour and roll quality are consistent from batch to batch.
Our materials are screened for REACH and RoHS compliance, and the factory operates an ISO 14001 environmental management system. Fire-rated grades tested to EN 13501-1 or CPAI-84 are available on request. Third-party test reports are provided with the quotation for the construction you choose.
Frequently asked
Do you sew enclosures?
No. We supply the roll material; enclosure manufacturers cut and sew to their own patterns.
Is the foil surface conductive?
The reflective layer is aluminium, so treat it as conductive and keep it clear of exposed electronics, or specify a film-coated face.